Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9214913
- Product Categories
- Friendly Links
Information Name: | The supply chemical plant dedicated acid repair mortar manufacturer 13354078802 |
Published: | 2012-12-19 |
Validity: | 300 |
Specifications: | 25kg |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Supply chemical plants dedicated acid repair mortar manufacturers Scope 1, fire-resistant, high temperature, applied to the surface of the concrete structure of the cellular, vulnerability and exposed tendons and other defects processing. Concrete structures, stair treads corrupted patch. 3, bonded steel reinforcement and sticky carbon fiber reinforced to do the ground leveling. 4, can be used as a corrosion-resistant materials in the corrosive environment of the sea water, saline areas, and chemical plants. Features impermeability, antifreeze, salt, alkali, weak acid corrosion resistance performance, and a strong cohesive force with a variety of materials. Thermal expansion coefficient and the concrete close, it is difficult to disengage from these is bonded on a substrate, good durability. In the wet surface of the substrate construction, without drying, and can be cured in a humid environment or underwater. Non-flammable, non-explosive, do not pollute the environment, harmless to human health. Low cost, only 30-50% of the epoxy resin mortar. Operation convenient construction is similar with ordinary cement mortar construction, easy to clean, the water can be cleaned. Physical performance testing project performance test results (Mpa) 28d 6.0 6.49 compressive strength, flexural strength (Mpa) 7d ---- ≥ 25 28d> 20 ≥ 35 neutral resistance (mm) 28d <5.0 1.8 bond Strength (Mpa) at normal temperature normal 28d> repeatedly 28d> 1.0 2.4 permeation amount (g) <20 15 24h absorbent capacity (g/m3) <1000 525 water absorption coefficient (kg/cm2? h0.5) <0.5 0.32 1.0 2.8 Hot and cold use check this product packaging intact, label verification. Open the lid, remove the three bags in barrels marked with A, B, C pre-ingredients. The after shaking materials A, B material, were poured into the bucket and stir evenly, and then marked with a "C" powder, stirring slowly into the barrel, stir into uniform mortar like that can. The mixed viscous or difficult to stir, the package can be added to 1-2kg of clean water and stir, does not affect the final performance of this product. Note This product is cement-based materials, fully hardened for 28 days. 24 hours to the FDA can be the next step. The epoxy mortar should be used up within 2 hours Banhao can be added to the appropriate water Stir and then with the situation in this period of time, such as to dry thickens. Packaging and storage specifications of this product packaging 20kg / barrel. 2 unopened shelf life of 12 months, beyond the shelf life shall be subject to inspection before continuing to use. This product is nontoxic, odorless, non-flammable, non-explosive, in line with the environmental protection requirements, according to general cargo storage and transportation. |
Admin>>>
You are the 6581 visitor
Copyright © GuangDong ICP No. 10089450, Dalian City, in northern China Yi Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 6581 visitor
Copyright © GuangDong ICP No. 10089450, Dalian City, in northern China Yi Building Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility